4. Meta Corrections

Jan 29, 2021 | Footscan Design Wizard

Meta Corrections We recommend that you not go too high if you are adding meta supports (meta bar or metatarsal pads).   The meta supports will be printed in the same material and thus can feel quite prominent in the orthotics.  In most cases 1 or 2mm will be...

3. Heel Corrections

Jan 29, 2021 | Footscan Design Wizard

Heel Corrections   Heel Pad (not available for cycling and ski devices) If necessary, you can add a Fat Pad, Heel Spur Pad or Plantar Fasciitis pad to the device.  Please note that this option is only available if an EVA top cover is selected and will add...

2. General Corrections and Local Stiffness

Jan 29, 2021 | Footscan Design Wizard

General Corrections and Local Stiffness   General Corrections – Stiffness Direction This correction is calculated based on the forces applied on the metatarsals and guide the foot towards supination (positive degrees) or towards pronation (negative...

1. General Info and Insole Composition

Jan 21, 2021 | Footscan Design Wizard

General Info and Insole Composition   It is important to know the intended usage of the orthotics and the shoes of your patient.  This will affect the orthotic type, topcover, and available corrections selected in your design. General Info:      ...