2. General Corrections and Local Stiffness

< All Topics

General Corrections and Local Stiffness


General Corrections – Stiffness Direction

This correction is calculated based on the forces applied on the metatarsals and guide the foot towards supination (positive degrees) or towards pronation (negative degrees).


General Corrections – Navicular Support

In the navicular support correction,  you influence the medial arch support of the orthotics.  The selection goes from extremely flat to extremely high.  The navicular height proposed by the software is calculated based on the dynamic measurement only.

The navicular height determined by the 3D scanner is not editable.  It is used as extra information to best decide what type of navicular support your patients needs.


Local Stiffness

This tool gives you the ability to modify the flexibility of the printed base in 5 predefined zones.  The calculations are based on the roll-off, the amount of internal or external rotation and the weight of the patient.



If you have any questions, please feel free to contact us at:
support@go4-d.com or 1-888-353-4643


Previous 1. General Info and Insole Composition
Next 3. Heel Corrections
Table of Contents
By |2021-05-13T12:43:56-04:00January 29th, 2021|Comments Off on 2. General Corrections and Local Stiffness

About the Author: